O

37

Oxygen cylinder filling station is an equipment that allows to provide product gas to remote and hard-to-reach places where its delivery is extremely expensive.

The ONH Systems Company offers units for medical organisations with a capacity of up to 60 m3/hour and a cylinder filling pressure of up to 200 bar.

These stations provide turnkey solutions for supplying companies and third-party customers with bottled oxygen for use as a primary/backup or emergency source. This guarantees complete independence from external suppliers. The customer can easily refill their own cylinders/monoblocks, and have absolute freedom of action in conditions of peak oxygen consumption in medical centres.

For convenience, we offer refuelling ramps that allow simultaneous refuelling of 2 to 10 cylinders. When equipment is placed in a block container, the fuelling ramp is located behind the swing gate of the block container. It is separated by a partition from the main equipment inside the container. This design allows for convenient refuelling of nitrogen and oxygen cylinders at the point of equipment installation.

Filling station standard equipment

Main components of the equipment include:

  1. Electric motor.
  2. Compression stages.
  3. Frame.
  4. Central control panel.
  5. Pressure gauges.

Станции заправки в баллоны

Cylinder filling stations

Auxiliary equipment

Oxygen cylinder filling station is additionally equipped with following components:

  1. Oxygen and nitrogen generators.
  2. Additional high-pressure hoses.
  3. Additional discharge ramp.
  4. Gas autoswitchover panel.
  5. Pressure reducer from 200 to 5 bar for supplying the customer’s circuit.
  6. Operating parameter dispatching.

Technical specifications

Operating principle: Oil-free piston compressor
Cooling type: Air or water cooling
Power consumption: 3-18,5 kW
Rpm: 350-740 rpm
Performance: 3-60 Nm3/hour
Inlet pressure: 4 bar
Outlet pressure: up to 200 bar
Number of stages: 3
Model Performance, Nm3/hour Inlet pressure, bar Outlet pressure, bar Power, kW Dimensions DxWxH, mm
СЗБ О2-3/4-150 3 4 150 3.0 1080х820х850
СЗБ О2-5/4-150 5 4 150 4.0 1080х820х850
СЗБ О2-5/4-200 5 4 200 4 1080х820х850
СЗБ О2-8/4-150 8 4 150 5.5 1080х870х850
СЗБ О2-8/4-200 8 4 200 5.5 1080х870х850
СЗБ О2-10/4-150 10 4 150 7.5 1250х900х850
СЗБ О2-10/4-200 10 4 200 7.5 1250х900х850
СЗБ О2-15/4-150 15 4 150 11 1350х990х850
СЗБ О2-15/4-200 15 4 200 11 1350х990х850
СЗБ О2-20/4-150 20 4 150 11 1350х990х850
СЗБ О2-25/4-150 25 4 150 15 1350х990х850

Advantages of buying the cylinder filling oxygen station

Pros of equipment purchase:

  1. Complete autonomy. Designed for standard (40 liter) and mobile (10 liter) cylinders on-site refuelling.
  2. Long life cycle. The design is heavy duty for continuous operation – 24 hours a day, 7 days a week.
  3. Oxygen high quality. Output purity 90-99%.
  4. Cost saving. The oxygen produced is characterised by low production costs. Payback period of the equipment is approximately 2 years.

PDF каталог продукции

How to purchase?

To inquire about the price and purchase an oxygen station for filling cylinders, please contact us by phone on the website or use the feedback form. We provide a warranty on installation for up to 24 months. We offer project development for customer’s individual requirements. We organise equipment delivery in minimum time and carry out commissioning. You can also order service and maintenance.

Submit a request

If you are interested in our equipment, and you would like to receive detailed information